Easy Tips to Update the Tplink Deco Firmware

 


TP Link Deco firmware update is necessary to operate at peak performance and security. Launch the Deco app on your tablet or smartphone to get started. Make sure the Deco network is linked to your device.
  •  Go to the "More" tab (usually located at the bottom right of the screen) from the main dashboard. To see whether there are any firmware updates available select "Update Deco". You will be prompted to proceed by the app if there is an update available. 
  • It is recommended that you update every Deco device at the same time in order to maintain network consistency. Ensure that every Deco unit is powered on and connected to the network before starting the update.
  • Give the app permission to download and install the firmware by tapping the "Update All" button. Your internet connection may be momentarily disrupted during this process which could take several minutes. 
  • When the update is running try not to disconnect or turn off any devices. Your Deco system will restart automatically and the app will alert you when the firmware has been successfully installed. 
  • Checking your network settings and performance after the upgrade is a good idea to make sure everything is operating as it should. Frequent firmware updates maintain the security and effectiveness of your Deco system.
For further assistance visit our website, talk to our professionally trained experts for more help.

Location: United States

Comments

Post a Comment

Popular posts from this blog

Deco Not Connecting to Internet? Here’s How to Fix It?

Image
There might be a number of reasons why your Tp link Deco not connecting to internet . First connect the modem directly to a device such as a computer to make sure it is operating correctly. Try restarting the modem and the Deco unit if the modem is able to connect to the internet but the Deco still doesn't work.  Turn off both devices for approximately ten seconds then turn on the modem and then the Deco. Examine the physical connections after that. Make sure that the main Deco and the modem are connected to the Ethernet wire firmly.  Resetting the network settings on your Deco system can be necessary if you're using a new modem or changing ISPs. To reset and reconfigure the connection open the Deco app go to the settings and follow the instructions. Make that the Deco system's firmware is current; out-of-date software might lead to issues with connectivity. Check for updates using the Deco app then install them. Make sure your Deco is set up with the necessary deco login ...
Read more

How to Setup the Tplink Deco?

Image
A TP-Link Deco mesh network is easy to set up and intuitive to use. The steps are as follows: Place each Deco unit in its designated spot after unpacking it. The TP-Link Deco app can be downloaded and installed from the app store on your device. Launch the app, sign in with an existing TP-Link account, or create a new one. To get the setup started, tap "Let's Begin." Using an Ethernet cable, connect the first Deco device to your modem and turn it on. Once the Deco unit has been detected, the app will walk you through the setup process. Configure your network name (SSID) and password according to the instructions. For best coverage, add more Deco units to the exterior of your house. One by one, you will be prompted by the app to add these units.  Make sure every device is turned on, then connect them to the network by following the directions on the app. Upon unit connection, the application will optimize the network. After that, you may alter configurations for things lik...
Read more